Colla per piastrelle di cemento 25 kg

  • usage up to 9sqm
  • for porcelain, ceramic, atural stone, cement tiles
  • high adhesion and flexibility
  • resistant to deformation

23,68 €

Questo prodotto non è più disponibile

The mortar Ceresit CM 17 is used for fixing ceramic tiles, cement and stone (except marble) on deformable substrates. Bond properties provide a flexible connection to the substrate carrying the shear stresses between the plate and the substrate. Therefore CM 17 is recommended for fixing tiles on slender partition walls, heated floors, facades, terraces and balconies, as well as in the basins of swimming pool and technology for water tanks. The high adhesion of the mortar makes recommended it to the tiles with water absorption <3%, for example. Grit also very large formats (pow. 1 m2) and for fixing tiles on critical substrates: the existing plates, strong and firmly adhering paint coatings, substrates gypsum, anhydrite, concrete cell.

Preparation of the product: The content of package should be poured into a container with a measured amount of cold water and stir using a drill with a mixer until the homogenous mass without lumps. Wait 5 minutes and mix again. If you need - add a small amount of water and stir again. Spread the mortar across the substrate with a notched trowel.

Scrivi una recensione

Colla per piastrelle di cemento 25 kg

Colla per piastrelle di cemento 25 kg

  • usage up to 9sqm
  • for porcelain, ceramic, atural stone, cement tiles
  • high adhesion and flexibility
  • resistant to deformation
© 2024 Cerames | All rights reserved | Design by PRESTAPREMIUM